Back to the Table of Contents
Latest News and Announcements from ECR:
Updated July 18th, 2011
Due to our current work load we are not taking on any new projects or setting up any further slots for work until we clear the backlog up a bit. We need to get caught up and reduce the backlog and are working hard to achieve that goal.
Thanks for your patience and understanding
East Coast Rover Co. is now simply ECR.
This is a simple name change for copyright reasons only (because Land Rover North America holds the word "Rover" as a trademark). There are no other changes in our company other than a shortening of the name.
New web site domain names will be used to reflect this name change as well. They are:
http://www.newecr.com
http://www.ecr4x4.com
http://www.ecrrox.com
In time, the domain name of "eastcoastrover.com" will be replaced with the domain names listed above.
Same web site, different name.
ECR now offers reproductions of the special washer that helps attach the rear/step tow bumper (ANR1576 and ANR2786) to the chassis' rear cross-member of 1993 NAS 110s and 1994-1997 NAS 90s.
These are parts we needed/use in our own restorations as we were finding these washers too rusted to be used in our work, or just plain missing, and they are not available from LR individually. In stock if you need one for your project.
Part #: ROXWASHER $35. each plus shipping/taxes
Call us if you would like to purchase some. Visa/MC
207-594-8086
ECR Defender 90 automatic console cubby box insert reproductions are now available!
This is a reproduction of the long discontinued part # AWR5695 as used in the 1997 NAS Defender 90
Over the last 13 years the original cubby box inserts have been damaged, lost, cut up and worse. We needed a way to make customer's 1997 Defender 90s look good again, so we had these reproductions created to our exacting standards and we are happy to say they fit better and are much more durable than the originals. They come pre-drilled and with the required (2) rivets to attach the striker plate from your old unit.
These are now available from ECR to help you get your own 1997 NAS (or Japanese Spec.) Defender 90's cubby box back into shape.
Part #: AWR5695R $120. each plus shipping/taxes
Call us if you would like to purchase some. Visa/MC
207-594-8086
Check out an article written about ECR in the upcoming April edition of Maine Magazine:
http://www.themainemag.com/
You can see the article here!
ECR is proud to announce our new in house trim and upholstery shop.
We will now be making seat covers, custom soft tops, and other custom soft trim items right here at ECR.
Farming these items out in the past not only cost the customer extra money due to shipping and transport costs, but has meant that we have not had control to do things exactly the way we want them done. The new ECR trim shop means that if we need custom door pockets for a BR130, or if you need seat covers in a custom color to match your interior it can all be done easily, on time and with ECR quality.
Stay tuned for images of the new trim shop to be added to the "Our Facility" page on the web site.
If you already have a Safety Devices Defender 90 roof rack, we now have replacement parts for you to keep your rack system in shape if it gets damaged.
Go here for details.
ECR is proud to announce its new relationship with Safety Devices International Ltd.
We are now the USA authorized sales and installation center for all things Safety Devices and Land Rover.
We could do a lot of fancy marketing here, but its really as simple as:
Safety Devices equipped Defender 110 after a roll over accident: ALIVE
Standard Defender 110 after a roll over accident: DEAD
Safety Devices is famous for making safety products that have ranged over the years from the safari cages used on the 1993-1997 NAS Defenders 90s and 110s, to the safety equipment for the Camel Trophy vehicles that conquered remote areas of the world over and over to race car cages for all makes and models. We will now be stocking, installing and selling via mail order, the entire range of Land Rover Safety Devices products. We will also be working directly with them in order to offer new and exciting products for your Land Rover vehicle in the near future.